Albert

LH 230

Equipment Rack Power – Make sure these power switches are on at all times! DO NOT TURN POWER OFF TO EQUIPMENT!!!!!!!!!!!!

Red Master Switch – Located at the top right of rack.

Green Switch – Located on the left side of the AV switcher.

Amplifier – Power button is located on the lower right of the amp.

Volume – Volume for all devices is controlled through the auxiliary dial (in the middle) on the amplifier.

Connecting Your Laptop (Lenovo Thinkpad)
(if you have a different make/model laptop please contact Media Services one full working day in advance for assistance (262) 551-5950)

Step 1. Turn on the data projector using the remote.

Step 2. Make sure the projector is set to Computer 1, (Computer on the remote).

Step 3. Boot up your laptop COMPLETELY before connecting the VGA cable from the equipment rack. Then plug in the cable.

Step 4. Press your Function key (Fn) and your F7 key at the same time to send the image to the projector. Hitting this combination in sequence alternates between the image on the laptop, the image on both the projector and the laptop, or just the image on the projector.

Step 5. (Volume) Make sure that the audio cable is connected from your laptop to the equipment rack. The audio plug on the equipment rack is located directly below the VGA plug on the equipment rack. Select PC (#2) on the audio/video switcher on the equipment rack. Volume is controlled through the auxiliary dial on the amplifier.

Using the DVD/VCR

Step 1. Turn on the data projector by using the remote.

Step 2. Make sure the projector is set to Video on the remote.

Step 3. Make sure all power switches are turned on. (see top of sheet)

Step 4. The audio switchbox must be set to VCR/DVD (Input 1).

Step 5. Turn on the VCR and play tape or DVD. Push play on the appropriate side of the player.

Step 6. (Volume) Volume is controlled through the auxiliary dial on the amplifier.