The article has been updated successfully.Dubbing from VHS to DVD
Dubbing from VHS tape to DVD
(copying an entire tape)
Copying media without the copyright owner’s express written permission is illegal and is prohibited on Carthage College equipment! See details at the bottom of this message.
Equipment for this procedure is located in the Media Suite, HL 166
- Make sure equipment is turned on and on the proper settings:
-
TV powered on and on “Game” input (video input)
-
JVC recorder powered on; press the DV/HDD/DVD button until the green DVD-REC light comes on
- Determine length of video to be dubbed.
-
Place tape in the JVC machine and find end of the program to be dubbed
-
Note the length of program on the counter
-
Put a blank DVD in the JVC recorder.
- Set recording time on the JVC recorder to accommodate the program length. Push the “Rec Mode/Remain” button on the JVC remote:
SP = 120 min or 2 hours
LP = 240 min or 4 hours
- RECORD:
-
Push play on the Panasonic VCR
-
Immediately, push the record button on the JVC Recorder. The green DVD and red REC LEDs will light.
- Once recording is finished, push stop on the VCR and the JVC DVD recorder and start Finalization.
-
Push “Setup” button on the JVC remote.
-
Move to “HDD/DVD SET UP”, then press the down arrow.
-
Go to “DISC SET UP”, then push the down arrow again.
-
Select “FINALIZE” and push the “ENTER” button.
-
Select an appropriate template by scrolling to it and pressing “ENTER”
-
Navigate to “OK” and press “ENTER”
-
Again, navigate to “OK” and press “ENTER”
- Take your completed DVD to another DVD player to make sure the copy works properly.
Reviewed/Approved 1/25/11
Related Articles
No related articles were found.Attachments
No attachments were found.Visitor Comments
No visitor comments posted. Post a commentPost Comment for "Dubbing from VHS to DVD"
To post a comment for this article, simply complete the form below. Fields marked with an asterisk are required.Article Details
Last Updated
3rd of May, 2012
